Search for Topics

FAQs

  • The WONDERBOOM 3 has up to 14 hours of playtime. Overall playtime depends on how you use your speaker, with things like the type of music and volume level all affecting the overall playtime.

  • Out of the package, WONDERBOOM 3 is ready to pair with your first Bluetooth device. Here’s how: Turn on the speaker by pressing the power button on the top of the speaker. The power indicator will glow white, and the Bluetooth connect button will blink white rapidly. On your Bluetooth device, go to the Bluetooth menu and scan for devices (make sure Bluetooth is enabled). Select WONDERBOOM 3 from the list of devices. Once paired and connected, you’ll hear an audible confirmation from the speaker. This means your WONDERBOOM 3 is ready to use. You can pair additional devices with your speaker.

  • Yes, you can connect two WONDERBOOM 3s together for bigger sound. PRESS AND HOLD the center button on both speakers at the same time until you hear the pairing tone. Once pairing succeeds, you will hear a confirmation tone and music playing on both speakers! PRESS AND HOLD the center button on both speakers again to toggle between mono mode and stereo mode.

  • To recharge your WONDERBOOM 3 speaker, plug in a micro-USB cable into the micro-­USB port located inside the weather door. Never charge your speaker if the micro-USB port, charging cable or connectors are wet, dirty or damaged. If you’ve used your speaker in a swimming pool or the ocean, we highly recommend that you thoroughly rinse your speaker with fresh water after using it. Once clean, allow the speaker to air dry completely before charging it. While the speaker is waterproof, the chemicals and salt in your pool or the ocean can damage the waterproof seals over time if not rinsed off after use.

    Always charge your speaker with a clean, dry micro-USB connector. If you think your cable or connector has been compromised in any way by water or other contaminants, do not use it to charge your speaker.

  • You can control the music directly from your WONDERBOOM 3 without picking up your phone. To pause the stream, simply press the center button located on the top of the speaker. Press it again to resume playing. Double press the button will skip to the next track.

  • You can check the battery level of your WONDERBOOM by pressing both the volume + and volume - buttons simultaneously. To find out what the tones mean based off the sound coming from your WONDERBOOM 3, click HERE.

  • For Android, you can change the display name of your WONDERBOOM 3 in the Bluetooth device menu. Here’s how: Open the Bluetooth device menu. Locate your WONDERBOOM 3 and tap the Settings icon next to it. Tap Rename and then enter the new name for your speaker. iOS Device You can’t change the display name of your WONDERBOOM 3 in the iOS Bluetooth device menu.